概述
前段时间学习了一些蓝牙开发的知识，记录一下Android中蓝牙的简单开发。下面是最重要的两个类。
BluetoothAdapter : 蓝牙适配器，通过getDefaultAdapter ()去获取一个实例，如果设备不支持蓝牙的话，返回的是一个null对象，通过它，可以打开、关闭蓝牙，扫描设备、向指定设备创建socket通道…
BluetoothDevice : 代表一个设备对象，可以通过它获取设备的名字、地址、类型等，也可以创建匹配，建立socket通道等等。
1、权限申请
<uses-permission android:name="android.permission.BLUETOOTH"/> 使用蓝牙所需要的权限 <uses-permission android:name="android.permission.BLUETOOTH_ADMIN"/> 使用扫描和设置蓝牙的权限（申明这一个权限必须申明上面一个权限）
Android6以上版本，扫描其他蓝牙还需要位置权限
// Android 9 以下版本 <user-permission android:name="android.permission.ACCESS_COARSE_LOCATION"/> // Android 9 以上 <uses-permission android:name="android.permission.ACCESS_FINE_LOCATION"/>
2、打开蓝牙
mBluetoothAdapter = BluetoothAdapter.getDefaultAdapter();
// 如果设备不支持蓝牙
if (mBluetoothAdapter == null){
return;
}
// 设备支持蓝牙功能，调用startActivityForResult去启动蓝牙
if (!mBluetoothAdapter.isEnabled()){
startBlueTooth.launch(new Intent(BluetoothAdapter.ACTION_REQUEST_ENABLE));
}
打开蓝牙功能是通过startActivity去启动的，但是startActivity这个函数已经过期了，所以我使用官方推荐的Activity Result替代它
ActivityResultLauncher<Intent> startBlueTooth = registerForActivityResult(new ActivityResultContracts.StartActivityForResult(),
new ActivityResultCallback<ActivityResult>() {
@Override
public void onActivityResult(ActivityResult result) {
if (result==null){
Toast.makeText(BlueToothActivity.this, "open failed", Toast.LENGTH_SHORT).show();
}else {
if (result.getResultCode() == RESULT_CANCELED){
Toast.makeText(BlueToothActivity.this,"用户取消",Toast.LENGTH_SHORT);
}
}
}
});
3、接收蓝牙状态的改变
通过广播去接收蓝牙状态的改变
class BluetoothStateChangeReceiver extends BroadcastReceiver{
public int DEFAULT_VALUE_BLUETOOTH = 1000;
@Override
public void onReceive(Context context, Intent intent) {
String action = intent.getAction();
if (BluetoothAdapter.ACTION_STATE_CHANGED.equals(action)){
int state = intent.getIntExtra(BluetoothAdapter.EXTRA_STATE,DEFAULT_VALUE_BLUETOOTH);
switch(state){
case BluetoothAdapter.STATE_ON:
Log.d(TAG, "onReceive: open");
break;
case BluetoothAdapter.STATE_OFF:
Log.d(TAG, "onReceive: off");
break;
case BluetoothAdapter.STATE_TURNING_ON :
Log.d(TAG, "onReceive: 正在打开");
break;
case BluetoothAdapter.STATE_TURNING_OFF:
Log.d(TAG, "onReceive: 正在关闭");
break;
}
}
}
}
别忘了广播的注册和解注册
IntentFilter filter = new IntentFilter(BluetoothAdapter.ACTION_STATE_CHANGED); stateReceiver = new BluetoothStateChangeReceiver() ; registerReceiver(stateReceiver,filter);
4、扫描其他的设备
同样通过广播接收，action是BluetoothDevice.ACTION_FOUND
class MyReceiver extends BroadcastReceiver{
@Override
public void onReceive(Context context, Intent intent) {
String action = intent.getAction();
if (BluetoothDevice.ACTION_FOUND.equals(action)) {
// 从intent对象中获取蓝牙设备的信息
BluetoothDevice device = intent.getParcelableExtra(BluetoothDevice.EXTRA_DEVICE);
// 当发现新设备不存在于配对列表中时添加
if (device.getBondState() != BluetoothDevice.BOND_BONDED) {
blueNames.add(device.getName() "\t" device.getAddress());
}
blueAdpater.notifyDataSetChanged();
Log.d(TAG, "onReceive: " device.getName());
}
}
}
动态注册广播
IntentFilter filter = new IntentFilter(BluetoothDevice.ACTION_FOUND); registerReceiver(mReceiver,filter);
开启扫描
mBluetoothAdapter.startDiscovery();
5、蓝牙配对
public class BondReceiver extends BroadcastReceiver{
@Override
public void onReceive(Context context, Intent intent) {
if (BluetoothDevice.ACTION_BOND_STATE_CHANGED.equals(intent.getAction())){
BluetoothDevice device = intent.getParcelableExtra(BluetoothDevice.EXTRA_DEVICE);
switch(device.getBondState()){
case BluetoothDevice.BOND_BONDED:
Log.d(TAG, "onReceive: 配对完成");
break;
case BluetoothDevice.BOND_BONDING:
Log.d(TAG, "onReceive: 正在配对");
break;
case BluetoothDevice.BOND_NONE:
Log.d(TAG, "onReceive: 取消配对");
break;
}
}
}
}
6、获取已经配对的设备
已经配对的设备会被存储起来，通过BluetoothAdpater直接获取即可
Set<BluetoothDevice> paireDevices = mBluetoothAdapter.getBondedDevices();
if (paireDevices.size()>0){
for (BluetoothDevice pairedDevice : pairedDevices) {
blueNames.add(pairedDevice.getName() " " pairedDevice.getAddress());
Log.d(TAG, "onClick: " pairedDevice.getName());
}
}
7、连接设备
想要在两台设备之间创建连接，必须实现客户端和服务端机制，他们之间使用套接字机制进行连接，服务端开放服务器套接字，客户端通过MAC地址向服务端发起连接。客户端和服务端以不同的方式获得BluetoothSocket,当客户端和服务端在同一个RFCOMM通道上分别拥有已连接的BluetoothSocket时，将他们视为彼此已经连接，于是每台设备都获得输入和输出流式传输，并开始传输数据。
连接技术
一种实现技术是自动将每台设备准备为一个服务器，从而使每台设备开放一个服务套接字并侦听连接，在此情况下，任何一台设备都可以发起与另一台设备的连接并称为客户端。
服务器
设置服务器套接字并接受连接，步骤依次如下
1、调用listenUsingRfcommWithServiceRecord（）获取一个BluetoothServerSocket, 该函数需要两个参数，第一个是服务器的名称，自己取一个即可，第二个是UUID，用来对信息做唯一性标识，我们可以从网上众多UUID生成器中随机的生成一个，然后使用UUID.fromString(String)初始化一个UUID。
2、通过accept()函数开始侦听连接请求
只有远程设备发送的连接请求中UUID与使用此套接字注册的UUID相匹配时服务器才会接受请求，accept函数会返回已连接的BluetoothSocket
3、连接成功后调用close()关闭BluetoothSocket
private class AcceptThread extends Thread{
private final BluetoothServerSocket mmServerSocket;
private String mSocketType;
public AcceptThread(boolean secure){
BluetoothServerSocket tmp = null;
mSocketType = secure ? "secure" : "Insercure";
try{
if (secure){
tmp = bluetoothAdapter.listenUsingRfcommWithServiceRecord(NAME_SECURE,MY_UUID_SECURE);
}else{
tmp = bluetoothAdapter.listenUsingRfcommWithServiceRecord(NAME_INSECURE,MY_UUID_INSECURE);
}
} catch (IOException e) {
Log.e(TAG,"socket type" mSocketType "listen() failed",e);
}
mmServerSocket = tmp;
}
@Override
public void run() {
Log.d(TAG, "Socket Type: " mSocketType
"BEGIN mAcceptThread" this);
setName("AcceptThread" mSocketType);
BluetoothSocket socket = null;
Log.d(TAG, "run: 开始监听");
while (true){
try{
socket = mmServerSocket.accept();
Log.d("acceptThread", "run: 连接成功");
connected(socket,socket.getRemoteDevice(),mSocketType);
} catch (IOException e) {
Log.e(TAG, "Socket Type: " mSocketType "accept() failed", e);
break;
}
}
Log.i(TAG, "END mAcceptThread, socket Type: " mSocketType);
}
public void cancel() {
Log.d(TAG, "Socket Type" mSocketType "cancel " this);
try {
mmServerSocket.close();
} catch (IOException e) {
Log.e(TAG, "Socket Type" mSocketType "close() of server failed", e);
}
}
}
上面的secure和Insecure只是使用了不同的UUID而已。
客户端
远程设备开启监听后，我们就发起向此设备的连接，首先必须先获得远程设备的BluetoothDevice对象，然后获取BluetoothSocket发起连接。
基本步骤如下
1、使用BluetoothDevice通过调用createRfcommSocketToServiceRecord(UUID) 获取 BluetoothSocket。
2、通过connect发起连接
private class ConnectThread extends Thread{
private final BluetoothSocket mmSocket;
private final BluetoothDevice mmDevice;
private String mSocketType;
public ConnectThread(BluetoothDevice device, boolean secure){
mmDevice = device;
BluetoothSocket tmp = null;
mSocketType = secure ? "Secure" : "Insecure";
try {
if (secure){
tmp = device.createRfcommSocketToServiceRecord(MY_UUID_SECURE);
}else {
tmp = device.createRfcommSocketToServiceRecord(MY_UUID_INSECURE);
}
} catch (IOException e) {
Log.e(TAG, "Socket Type: " mSocketType "create() failed", e);
}
mmSocket = tmp;
}
@Override
public void run() {
Log.i(TAG, "BEGIN mConnectThread SocketType:" mSocketType);
setName("ConnectThred" mSocketType);
// 总是取消发现，因为它会减慢连接
bluetoothAdapter.cancelDiscovery();
// connect
// Make a connection to the BluetoothSocket
try {
// This is a blocking call and will only return on a
// successful connection or an exception
mmSocket.connect();
Log.d(TAG, "run: socket连接成功");
} catch (IOException e) {
// Close the socket
Log.d(TAG, "run: 关闭socket");
try {
mmSocket.close();
} catch (IOException e2) {
Log.e(TAG, "unable to close() " mSocketType
" socket during connection failure", e2);
}
return;
}
connected(mmSocket,mmDevice,mSocketType);
}
public void cancel(){
try{
mmSocket.close();
} catch (IOException e) {
Log.e(TAG, "close() of connect " mSocketType " socket failed", e);
}
}
}
发送数据
连接成功后，我们就可以通过socket发送数据了，客户端的Socket对象是BluetoothSocket, 服务端的socket是BluetoothServerSocket，特别注意不要混淆了。使用getInputStream和getOutputStream分别获取通过套接字处理数据传输的InputStream和OutputStream。写数据比较简单，但是读数据就需要一个单独的线程一直监听才行。
private class ConnectedThread extends Thread{
private final BluetoothSocket mmSocket;
private InputStream mmInStream;
private OutputStream mmOutStream;
public ConnectedThread(BluetoothSocket socket, String socketType) throws IOException {
Log.d(TAG, "create ConnectedThread: " socketType);
mmSocket = socket;
InputStream tmpIn = null;
OutputStream tmpOut = null;
try{
tmpIn = socket.getInputStream();
tmpOut = socket.getOutputStream();
if (socket != null){
tmpOut.write(new String("hello").getBytes());
Log.d(TAG, "ConnectedThread: socket不是null");
}
} catch (IOException e) {
Log.e(TAG,"temp socket not created", e);
}
mmInStream = tmpIn;
mmOutStream = tmpOut;
// mmOutStream.write(new String("hello").getBytes());
}
@RequiresApi(api = Build.VERSION_CODES.KITKAT)
@Override
public void run() {
Log.i(TAG, "BEGIN mConnectedThread");
byte[] buffer = new byte[1024];
int bytes;
while (true){
try{
bytes = mmInStream.read(buffer);
// send the bytes to the ui Activity
String text = encodeByteToString(buffer,bytes);
Log.d(TAG, "run: 收到消息：" text);
chatItems.add(text);
mHandler.sendMessage(mHandler.obtainMessage());
} catch (IOException e) {
Log.d(TAG, "run: 没有收到消息");
e.printStackTrace();
break;
}
}
}
public String encodeByteToString(byte[] data,int length) {
byte[] temp = new byte[length];
for (int i = 0; i < length; i ) {
temp[i] = data[i];
}
try {
return new String(temp,"utf-8");
} catch (UnsupportedEncodingException e) {
return "";
}
}
public void write(byte[] buffer){
try{
mmOutStream.write(buffer);
// mHandler.obtainMessage(Constants.MESSAGE_WRITE,-1,-1,buffer).sendToTarget();
} catch (IOException e) {
e.printStackTrace();
}
}
public void cancel(){
try{
mmSocket.close();
Log.d(TAG, "cancel: connectedThread");
} catch (IOException e) {
Log.e(TAG, "close() of connect socket failed", e);
}
}
}
上面的例子我主要是学习官网上的蓝牙聊天项目写的代码，大家也可以直接看官网项目。从上面的例子中可知，接受到的数据流都是一些二进制，要用到实际的项目中还需要进行一定的编码和转换。也就是自己编写一些协议，学过socket编程的同学一定都懂，其实蓝牙已经有很多的好用的协议了，就比如AVRCP（Audio Video Remote Control Profile），定义了蓝牙设备和audio/video控制功能通信的特点和过程, 结合MediaSession 可以很容易的实现设备音视频控制。
到此这篇关于android蓝牙简单开发示例教程的文章就介绍到这了,更多相关android蓝牙开发内容请搜索Devmax以前的文章或继续浏览下面的相关文章希望大家以后多多支持Devmax！